DIY Fall Starbucks Cold Cup Vinyl Decal
This post and the photos within it may contain affiliate links. As an Amazon associate I earn from qualifying purchases. If you make a purchase through one or more of the links, I may receive a small commission at no extra cost to you.
Decorate your own Starbucks Cold Cup with these easy DIY vinyl decals! Download a FREE Pumpkin Starbucks Cup Wrap SVG and a Pumpkin Spice Everything Starbucks Cup SVG and use your Cricut machine to make your own cups that are perfect for Fall!
I’ve been looking for the perfect Starbucks reusable cup to use this Fall, because I love ALL of the pumpkin spice flavors. I decided to make my own Starbucks Cold Cup SVG files, and I’m sharing them for FREE! Head to the end of the post to the large gray box to download both SVG files.
I designed two files: a Pumpkin Spice Everything circle to go around the Starbucks logo of a cold cup, and a Starbucks Cold Cup Wrap that’s covered with little pumpkins.
RELATED POST: Free Harry Potter Starbucks Label SVG
Both wraps are perfect for the Fall season. While everyone is still stuck at home, have some fun with a fall DIY project. They are so easy to make and you can show off your love of pumpkins and fall flavors. Make yours today with these user-friendly files!
What You Need to Decorate Your Own Fall Starbucks Cold Cups with Vinyl
- Cutting Machine (Buy a Cricut on Amazon | Cricut | Michaels)
- Adhesive Vinyl from Cricut | Expressions Vinyl | Michaels | Heat Transfer Warehouse
- Transfer Tape from Amazon | Cricut | Expressions Vinyl | Michaels | Heat Transfer Warehouse
- SVG Files to Fit Starbucks Cold Cups (Download at the end of the post)
- Reusable Starbucks Cold Cups – available at your local Starbucks store for a few dollars.
-
Product on saleHarry Potter Schools Starbucks SVG Cut File BUNDLEOriginal price was: $11.96.$4.99Current price is: $4.99. -
Product on saleHarry Potter Places Starbucks SVG Cut File BUNDLEOriginal price was: $11.96.$4.99Current price is: $4.99.
-
Product on saleHarry Potter Quidditch Starbucks SVG Cut File BUNDLEOriginal price was: $11.96.$4.99Current price is: $4.99.
How to Make Starbucks Cup Vinyl Decals
Open the .zip file and upload the Starbucks label or cup wrap in Cricut Design Space.
If you’re new to using SVG files with your Cricut machine, make sure you read my full post on How to Upload an SVG to Cricut Design Space.
The SVG designs are already designed and sized to fit the cups – you shouldn’t have to resize them.
When you’re ready to cut, click the green “Make It” button.
Place your orange vinyl right side up on the cutting mat. Select “Premium Outdoor Vinyl” or “Premium Vinyl” as your material. I prefer to select the “More” setting, as I find that it makes the vinyl easier to weed.
Follow the onscreen instructions to cut your vinyl. Weed away the excess vinyl, cutting as necessary to avoid the vinyl sticking to itself.
-
Product on saleHarry Potter Starbucks SVG Cut File BUNDLEOriginal price was: $29.94.$10.99Current price is: $10.99.
How to Apply Vinyl Decals and Cup Wraps to Starbucks Cold Cups
For the Pumpkin Spice Everything cup label, first apply the transfer tape to the white lettering, then place the transfer tape on top of the orange label to center the lettering. Use a scraper to adhere the transfer tape to the vinyl.
Start at the center of the cup and apply both layers at once. Leave equal spacing around the Starbucks logo.
Press the design down towards the outside and rub in place with a scraper or your finger and use a blow dryer as necessary.
Remove transfer tape carefully.
Let the vinyl adhesive cure to the cup for 24 hours before using.
For the Pumpkin Starbucks cup wrap, place transfer paper over the whole design. Adhere well with a scraper.
Remove the design from the backing paper.
Start the application of the cup wrap in the center of the cup over the logo. Work your way from the center of the cup the whole way around, making sure the vinyl lays flat.
Press the design down towards the outside and rub in place with a scraper or your finger and use a blow dryer as necessary.
Remove transfer tape slowly and carefully.
Let the vinyl adhesive cure to the cup for 24 hours before using. Enjoy!
LATEST POSTS:
- How to Make a Spotify Code Necklace with a xTool F1
- Make Laser Engraved Jewelry with the xTool F1 Laser Machine
- Free Printable Stanley Valentine’s Day Card
- Free Printable Conversation Hearts Sticker Set
- Lover Sublimation Design for Valentine’s Day
Download FREE Starbucks Cold Cup Wrap and Pumpkin Label
This file is DOWNLOAD #156 in my FREE DOWNLOADS LIBRARY.
Get the password below! (If you have the password, head over to the library to download the file.
You will NOT receive an email with the download file. SVG files can be used with Cricut Design Space and upgraded versions of Silhouette Studio.
Pin the Starbucks Decals to Your Favorite Crafting Boards!
I was able to download but I am not able to make it clear in erasing the white lines
Don’t right click to use the image on the blog – go to the gray box, enter your email address and download the real SVG file š
Oh my goodness, my daughter is gonna love one of these Starbucks cups!!!
I followed your directions, but it did not download as an svg–only png or html. Did I do something wrong?
Nope! You’re good! The html file is your computer trying to open the SVG when you don’t have a program that will read it. Just go to Cricut Design Space and upload the .svg file. Let me know if you need more help!
Thank you so much! My daughters love Starbucks coffee and will love these!
Hi! Thank you so much for this file; however, every time I attempt to download it, after entering my email address, it takes me to a new screen where it says “Invalid Download”.
I’ve made a few different attempts, but I am not able to download at all. Thank you again for your hard work.
Sorry you’re having problems! Emailed you š
Awesome! I hope you share more Starbucks designs. Thanks so much!!!!
Can I use this in Silhouette? If so, is it the same directions? Love the design!!
Just emailed you! š
Iām not using design space. When I open in my software, it needs to be resized. What are the W and H sizes? Thanks in advance!
The exact size of the SVG files are wrap: 9.89 in w x 5.70 in h and label: 3.65 in w x 3.41 in h
I want to learn how can i create svg designs for starbucks full wrap on adobe illustrator. Do you have mentorship program for that? I’m ready to pay for the mentorship.
I don’t! Thanks for your interest, though!
Does it come with commercial license? Thank you.
No, my SVG files are for personal use only š
Thank you for the clips! Can’t wait to show it off on my Starbuck Cup!!!!!
Love this site. Starbucks and Harry Potter. š Thank you so much for letting use your site. I running off to use the Starbucks Pumpkin wrap download, but, I’ll be back to visit Harry Potter. Thank you so much. Have an awesome Monday! Cheryl
i downloaded from the library to my silhouette, its coming over as an image and not a cut file. What should i do? thank you
Make sure you’re using the .svg file š If your computer doesn’t have a built in program that previews them (Adobe, etc) it may look like a webpage or blank document.