Give Thanks Centerpiece Box DIY + Free Give Thanks SVG

Happy Fall Y’all! Today I’m sharing how to make my newest piece of DIY Thanksgiving decor – this gorgeous personalized Thanksgiving Centerpiece box! This DIY Thanksgiving Centerpiece box would be perfect to take to Thanksgiving dinner as a hostess gift, or to adorn your own table. And to make this project REALLY easy for you, I’m sharing the FREE Give Thanks SVG with y’all!

This post and the photos within it may contain affiliate links. If you make a purchase through one or more of the links, I may receive a small commission at no extra cost to you.

I’ve really been wanting to make a centerpiece box for my Thanksgiving table, but hadn’t come across the right box. (Trust me, constructing things from wood is NOT my strongest crafting ability). I finally came across this one on clearance at Sam’s Club (of all places, right?!) and I loved the arrangement in it, AND the box! Score! I quickly came up with a hand lettered SVG to put on the side, and with my Cricut machine made a DIY Personalized Thanksgiving Centerpiece Box in a few minutes! The best trick to this project is that by using Iron On Vinyl, there’s so transfer paper and the design applies SO quickly to the centerpiece box. Scroll to the bottom of the post to get your FREE DOWNLOAD of the Give Thanks SVG!

I’ve posted SO many Free SVGs (and some Free Printables, too!) over the last couple of weeks! Make sure you sign up for my EMAIL LIST so you don’t miss any, and check back on the Free Downloads page to see all of the files available!

Supplies You Need to Make a Personalized Centerpiece Box

–Cricut Machine

–Iron On Vinyl

–Cricut EasyPress 2 (it’s SO much easier than using an iron!)

-Centerpiece Box (you can get started with a Blank One like this, too!)

How to Make a Personalized Thanksgiving Centerpiece Box

First upload, your Free Give Thanks SVG to Cricut Design Space.

Size the design to fit your centerpiece box. Click “Make It.”

Use cut settings based on the material you’re using. I used Iron On Vinyl, so I MIRRORED my image!

Weed away all of the extra vinyl.

Preheat your EasyPress (300 degrees for wood and Everyday Iron On – check the EasyPress Settings Interactive Guide HERE if you need to!)

Line up design in the middle of your box. Preheat for 5 seconds and press design for 40 seconds. (If you have a large centerpiece box, this is a great time to use one of the new Large Size EasyPress 2 machines!)